Reference for Avaya Communications DEFINITY G3

Step 5: Starting the CallPath Server Management Facility and configuring CallPath Server for OS/2

Following is an overview of the tasks required for manually starting the CallPath Server Management Facility and configuring CallPath Server for OS/2:

• Starting the CallPath Server Management Facility
• Configuring CallPath Server for OS/2
• Starting the CallPath Server for OS/2 subsystem to confirm that the CallPath Server for OS/2 configuration works

These tasks are described in more detail in the following sections.

If you encounter errors or problems when trying to start CallPath Server for OS/2, see the CallPath Server Planning, Installation, and Problem Determination Guide.

Starting the CallPath Server Management Facility

Start the CallPath Server Management Facility by doing one of the following:

• Type csasrvr at the OS/2 command prompt.
• Double-click on the CallPath icon on the OS/2 desktop and then double-click the CallPath Server Management Facility icon.

After CallPath Server for OS/2 is started, the CallPath Server Management Facility window and the Product Information window are displayed. Click OK to clear the Product Information window.

If password protection was enabled, the Administrative Password window is also displayed and the password must be entered to gain access to the CallPath Server Management Facility configuration functions.

To enter the password and gain access to the CallPath Server Management Facility, do the following:

1. Type the password, then click OK.

   Note:

   The default password, until you change it, is password.

2. Click OK in the CallPath Server Management Facility Product Information window to access the CallPath Server Management Facility window.

See the CallPath Server Planning, Installation, and Problem Determination Guide for a description of the CallPath Server Management Facility window and how to use the window's features.

Configuring CallPath Server for OS/2 for a minimal configuration

CallPath Server for OS/2 requires certain operating parameters before it can communicate with client applications. The following are the minimum parameters you must enter:

• Maximum number of applications capable of connecting to the server at the same time
• Maximum number of concurrent users allowed to access CallPath Server for OS/2

To configure CallPath Server for OS/2, do the following:

1. Display the Set Server Configuration window in one of the following ways:
   • From the CallPath Server Management Facility menu bar:
     1. Select the Configuration menu.
     2. Select the Server menu option.
   • From the CallPath Server icon:
     1. Select the CallPath Server icon using the mouse menu button.
     2. Select Configuration.
2. Enter new maximum values for the following fields. (See the CallPath Server Planning, Installation, and Problem Determination Guide for information on tuning the CallPath Server for OS/2 parameters in this window.)

   Number of concurrent applications

   The maximum number of applications that will be running at the same time.

   Number of concurrent users

   Set to the number of authorized concurrent users from IBM. Contact your purchasing organization if you do not know this number.

3. Click OK to accept the CallPath Server for OS/2 configuration values.

The new configuration values take effect the next time CallPath Server for OS/2 is started.

Starting the CallPath Server for OS/2 subsystem

After starting the CallPath Server Management Facility, start the CallPath Server for OS/2 subsystem in one of the following ways:

• From the CallPath Server Management Facility window:
  1. Select the Administration menu option from the menu bar.
  2. Select the Server menu option.
  3. Select Start.
  4. Click on one of the following in response to the confirmation message:
     • Yes to start the CallPath Server for OS/2 subsystem
     • No to return to the CallPath Server Management Facility window without starting the CallPath Server for OS/2 subsystem
  5. Select Yes from the confirmation message window.
• From the CallPath Server icon:
  1. Click the CallPath Server icon.
  2. Select Start.
  3. Click on one of the following in response to the confirmation message:
     • Yes to start the CallPath Server for OS/2 subsystem
     • No to return to the CallPath Server Management Facility window without starting the CallPath Server for OS/2 subsystem

If you are installing CallPath Server for OS/2 for the first time, you should try starting the CallPath Server for OS/2 subsystem to make sure that the configuration works. If you cannot start the CallPath Server for OS/2 subsystem, see the CallPath Server Planning, Installation, and Problem Determination Guide.