Reference for Avaya Communications DEFINITY G3

Step 8: Starting CallPath Server for OS/2 and DEFINITY G3

Following is an overview of the tasks required for starting the CallPath Server for OS/2 subsystem and the DEFINITY G3 Switch Connection:

• Start the CallPath Server Management Facility
• Start the CallPath Server for OS/2 subsystem
• Start the DEFINITY G3 Switch Connection

These tasks are described in more detail in the following sections.

If you encounter errors or problems when trying to start the CallPath Server for OS/2 subsystem, see the CallPath Server Planning, Installation, and Problem Determination Guide.

Starting the CallPath Server for OS/2 Management Facility

Start the CallPath Server for OS/2 Management Facility by doing one of the following:

• Type csasrvr at the OS/2 command prompt.
• Double-click the CallPath icon on the OS/2 desktop and then double-click the CallPath Server for OS/2 icon.

After CallPath Server for OS/2 is started, the CallPath Server Management Facility window and the Product Information window are displayed. Click on OK to clear the Product Information window.

If password protection was enabled, the Administrative Password window is also displayed and the password must be entered to gain access to the CallPath Server Management Facility configuration functions.

To enter the password and gain access to the CallPath Server Management Facility, do the following:

1. Type the password, then click OK.

   Note:

   The default password, until you change it, is password.

2. Click on OK in the CallPath Server Management Facility Product Information window to access the CallPath Server Management Facility window.

See the CallPath Server Planning, Installation, and Problem Determination Guide for a description of the CallPath Server Management Facility window and how to use the window's features.

Starting the CallPath Server for OS/2 subsystem

After starting the CallPath Server Management Facility, start the CallPath Server for OS/2 subsystem in one of the following ways:

• From the CallPath Server Management Facility window:
  1. Select the Administration menu option from the menu bar.
  2. Select the Server menu option.
  3. Select Start.
  4. Click on one of the following in response to the confirmation message:
     • Yes to start the CallPath Server for OS/2 subsystem
     • No to return to the CallPath Server Management Facility window without starting the CallPath Server for OS/2 subsystem
• From the CallPath Server icon:
  1. Click the CallPath Server icon.
  2. Select Start.
  3. Click on one of the following in response to the confirmation message:
     • Yes to start the CallPath Server for OS/2 subsystem
     • No to return to the CallPath Server Management Facility window without starting the CallPath Server for OS/2 subsystem

If you cannot start the CallPath Server for OS/2 subsystem, see the CallPath Server Planning, Installation, and Problem Determination Guide.

Starting the DEFINITY G3 Switch Connection

Start the DEFINITY G3 Switch Connection in one of the following ways:

• From the CallPath Server Management Facility window menu bar:
  1. Select the Administration menu.
  2. Select the Switch Connection menu option.
  3. Select Start.
  4. Select the switch.
  5. Click on one of the following in response to the confirmation message:
     • Yes to start the switch
     • No to return to the CallPath Server Management Facility window without starting the switch
• From the CallPath Server Management Facility window switch icon:
  1. Click the Switch icon.
  2. Select Start.
  3. Click on one of the following in response to the confirmation message:
     • Yes to start the switch
     • No to return to the CallPath Server Management Facility window without starting the switch