Reference for Avaya Communications DEFINITY G3
Following is an overview of the tasks required for starting the CallPath
Server Management Facility and configuring CallPath Server for AIX:
- Starting the CallPath Server Management Facility
- Configuring CallPath Server for AIX
- Starting the CallPath Server for AIX subsystem to confirm that the
CallPath Server for AIX configuration works
These tasks are described in more detail in the following sections.
- Note:
- If you encounter errors or problems when trying to start CallPath Server for
AIX, see CallPath Server Planning, Installation, and Problem
Determination Guide.
There are two methods you can use to start the CallPath Server for AIX
Management Facility:
- From the system prompt
- From SMIT
These methods are described in the following sections.
You can start the CallPath Server for AIX Management Facility from the
system prompt by doing the following:
- Log on to the system as an authorized group.
- Type the following command:
- cd /usr/lpp/csasrvr/bin
- Type csasrvr.
After CallPath Server for AIX is started, the CallPath Server Management
Facility window and the Product information window are displayed.
If password protection was enabled, the Administrative Password window is
also displayed and the password must be entered to gain access to the CallPath
Server Management Facility configuration functions. To enter the
password and gain access to the CallPath Server Management Facility, type the
password, then click on OK.
- Note:
- The default password, until you change it, is password.
See CallPath Server Planning, Installation, and Problem Determination
Guide for a description of the CallPath Server Management Facility
window and how to use the window's features.
SMIT can be run in either MOTIF (using AIXwindows and a mouse) or character
mode (using the cursor keys). The examples in this book describe MOTIF
CallPath Server Management Facility windows and screens. If you run
CallPath Server for AIX on an Xstation and use MOTIF, but would like to use
SMIT in character mode, type smit -C csasrvr on the command
line. This temporarily changes SMIT from MOTIF to character
mode. See the CallPath Server Planning, Installation, and Problem
Determination Guide for sample CallPath Server Management Facility
screens in character mode.
To start the CallPath Server for AIX Management Facility from SMIT, do the
following:
- Log on to the system as an authorized group.
- Type smit at the system prompt.
- Select Communications Applications and Services from the System
Management menu.
- Note:
- SMIT provides fastpath commands that take you directly to a SMIT panel
without making individual menu selections.
- Select CallPath Server for AIX.
After CallPath Server for AIX is started, the CallPath Server Management
Facility window and the Product Information window are displayed.
If password protection was enabled, the Administrative Password window is
also displayed and the password must be entered to gain access to the CallPath
Server Management Facility configuration functions.
To enter the password and gain access to the CallPath Server Management
Facility, do the following:
- Type the password, then click on OK.
- Note:
- The default password, until you change it, is password. If
you use SMIT, there is no Administrative Password window and hence, no
password.
- Click on OK in the CallPath Server Management Facility Product
Information window to access the CallPath Server Management Facility
window.
CallPath Server for AIX requires the following operating parameters before
it can communicate with client applications:
- Maximum number of applications capable of connecting to the server at the
same time
- Maximum number of concurrent users allowed to access CallPath Server for
AIX
To configure CallPath Server for AIX, do the following:
- Display the Set Server Configuration window in one of the
following ways:
- From the CallPath Server Management Facility menu bar:
- Select the Configuration menu.
- Select the Server menu option.
- From the CallPath Server icon:
- Select the CallPath Server icon using the mouse menu
button.
- Select Configure.
- Enter new maximum values for the following fields. (See the
CallPath Server Planning, Installation, and Problem Determination
Guide for information on tuning the CallPath Server for AIX parameters
in this window.)
- Number of concurrent applications
- The maximum number of applications that will be running at the same
time.
- Number of concurrent users
- Set to the number of authorized concurrent users from IBM. Contact
your purchasing organization if you do not know this number.
- Click on OK to accept the CallPath Server for AIX configuration
values.
The new configuration values take effect the next time CallPath Server for
AIX is started.
After starting the CallPath Server Management Facility, start the CallPath
Server for AIX subsystem in one of the following ways:
- From the CallPath Server Management Facility window:
- Select the Administration menu from the menu bar.
- Select the Server menu option.
- Select Start.
- Click on one of the following in response to the confirmation
message:
- Yes to start the CallPath Server subsystem
- No to return to the CallPath Server Management Facility window
without starting the CallPath Server subsystem
- Select Yes from the confirmation message window.
- From the CallPath Server icon:
- Click the CallPath Server icon.
- Select Start.
- Click on one of the following in response to the confirmation
message:
- Yes to start the CallPath Server subsystem
- No to return to the CallPath Server Management Facility window
without starting the CallPath Server subsystem
[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]